Service; Standards And Regulations - InfraTec Signum plus XB Handbuch

1
Please Note
1.4

Service

1.5
Standards and
Regulations
46
Please contact LINDY Electronics Ltd.
plus
The Signum XB is manufactured and inspected by LINDY Electronics
Ltd. in accordance with the relevant regulations. If the unit is installed in, for
example, a cabinet, the additional requirements of IEC 950 must be
observed.
The signal multiplexer Signum
of the European Directive on electromagnetic compatibility EMC
(89/336/EEC) and the low-voltage directive (73/23/EEC).
plus
The design of the Signum
regulations:
EN 50082-1: Basic special standard on interference resistance in
the industrial sector (IEC 801-2/84; -4/84)
ENV 50 140: Basic Immunity Standard; radiated radio-frequency
electromagnetic field immunity test; German version.
ENV 50 141: Basic Immunity Standard; Immunity to conducted
disturbances induced by radio frequency fields;
German version.
EN 55022/Class B: Limits and methods of measurement of radio
disturbance characteristics of information technology
equipment; German version.
EN 60 950 (IEC 950): Safety of information technology equipment including
electric office machinery.
EN 61 000-4-2/-4-4 Testing and measuring techniques; 2: Electrostatic
discharge immunity test; 4: Electrical fast
transient/burst immunity test; Basic EMC Publication;
German version.
Signum
plus
XB complies with the safety requirements
XB is based on the following standards and
plus
XB