Plus Components; Siplex Plus Connection Boxes - Infratec Signum Plus Xb Handbuch

2
Technical
Description
Power supply and operating
safety
Operation and display
Autoscan function
Setting and storing
Software
Option for the Signum
2.3
The Signum
Components
2.3.1
plus
Siplex Connection Boxes
plus
Siplex console box (Console)
48
The emulation circuits are supplied with power by the connected computers.
Switching off the Signum
computers.
When a Siplex
and signal multiplexer can even be interrupted without restricting computer
operation at the same time (e.g. during maintenance or when modifying the
Signum system).
The Signum
panel. The Signum
instead of via the pushbuttons on the basic unit. (Hotkey functions
All messages and possible selections are displayed on an illuminated 16-
character LC display. They can be displayed in German or English, as
desired.
Any desired name comprising up to 10 characters can be allocated to each
channel (
An autoscan function permits the cyclic monitoring of all connected
computers (the dwell time on each channel and the channels to be scanned
can be selected).
The Signum
pushbuttons on the front or via a PC using the software supplied. The entire
configuration of the system is stored permanently in a flash EPROM, which
means that it is retained even in the case of a power failure or if the unit is
switched off for transport.
The software of the Signum
tinually. Any necessary updates can be installed quickly and easily. The latest
version is available on the Internet (
Please note the instructions enclosed with each software update (in this
case version 5.50).
plus
– Virtual channel assignment (
XB
assigned to simplify selection of the computer regardless of the wiring
structure.
plus
Examples of possible configurations and combinations
– For connection of the individual elements (monitor, keyboard, mouse) of a
operator console to a passive passive console connection, even over
large distances.
– Connection sockets for the console:
VGA monitor: HD 15
Mouse: D-SUB 9 (serial) or PS/2 (mini-DIN)
Keyboard: DIN 5 or PS/2 (mini-DIN)
This is thus a flexible alternative to the active console connection
Console 1.
– The box is connected to a passive console connection via a Siplex
cable (
Signum
plus
XB thus has no effect on the operation of these
plus
connection box is interconnected, the link between box
plus
XB is operated with the aid of 4 push buttons on the front
plus
XB can also be controlled via the console keyboard
4.4.4 ).
plus
XB system can be individually set either via the four
plus
XB is being improved and expanded con-
1.4).
4.4.5 ): Virtual channel numbers can be
2.3.2 ).
plus
XB
4.5 ).
2.4.
plus