Installation And Commissioning; Putting Into Service - InfraTec Signum plus XB Handbuch

3
Installation and
Commissioning
3.5

Putting into Service

Switching on
Note
58
• Check that all cables are correctly
connected to the Signum
• Check that the mains voltage is
set correctly (
• Wait for the following messages to
be displayed:
BIOS test and display of the
SYSTEM CHECK
version number
Unit type
Signum plus XB16
Copyright
(c) 1995/98 by
Manufacturer
Lindy
Operating software version
Software V5.50
level 2 (slave) Current operating mode (cascade level)
Display in normal operating state (channel 1, PC switched on)
1:Channel 1 OK
The unit is now in its normal operating state (
If you encounter any problems:
All the functions and displays specified in the manual depend on the
operating software version used. The latest version is available on the
Internet (
Signum
plus
XB.
3.4.2 ).
C o
n s
C a
s c
5
1.4 ).
plus
XB
o l
e
a d /
e
C o
n s
o l
e
4
C o
n s
o l
e
2
2 3
0
4.2 ).