Clock Functions - IKEA GRÄNSLÖS Handbuch

ENGLISH
The microwave function will start as
soon as the set temperature is reached.
When you use the Microwave function
with the function Duration for more than
7 minutes and in Combi mode, the
Microwave power cannot be more than
600 W.
Around 5 degrees before the set
temperature is reached the signal sounds.
When the set time for Duration ends the
signal sounds again and the oven stops.
6. Turn the knob for the heating functions
to the off position.
While using Microwave
Combi function the oven can
make various noises. They
are normal for this function.
Fast Heat Up
The fast heat up decreases the heat up
time.

Clock functions

Clock functions table
Clock function
To show or change the
time of day. You can
TIME OF DAY
change the time of day
only when the oven is off.
To set how long the oven
works. Use only when a
DURATION
heating function is set.
To set when the oven
turns off. Use only when a
END
heating function is set.
Combination of DURA-
TION and END function.
TIME DELAY
Application
Do not put food in the oven when
the Fast heat up operates.
1. Turn the knob for the oven functions to
set the fast heat up.
2. Turn the knob for the temperature to set
the temperature.
The signal sounds when the oven is at the
set temperature.
3. Set an oven function.
Heat-up indicator
When the oven function operates, the bars
in the display appear one by one when
the temperature in the oven increases, and
disappear when it decreases.
Clock function
Use to set a countdown
time. This function has no
MINUTE
effect on the operation of
MINDER
the oven. You can set the
MINUTE MINDER at any
time, also if the oven is
off.
00:00 If you do not set any oth-
COUNT UP er clock function the
TIMER COUNT UP TIMER auto-
matically monitor how
long the oven works.
The counting starts imme-
diately when the oven
starts to heat.
The Count Up Timer can-
not be used with the func-
tions: DURATION, END.
14
Application