Functions - IKEA BEJUBLAD Handbuch

ENGLISH 14

Functions

This function prevents an accidental operation of the appliance.
To activate: If the pot is placed, press and hold for 3 seconds the correspondent digit. If the pot is not
placed press and hold for 3 seconds one of the 4 digits (not visible) near the dot on the left side.
Release and slide your finger from 0 to 9 along the power bar which shows the operating sequence.
Child lock
All the digits display .
The operations described must be completed within 10 seconds.
To deactivate: press and hold for 3 seconds one of the 4 digits for the cooking areas. Release and slide
your finger from 9 to 0 along the power bar which shows the operating sequence.
The operations described must be completed within 10 seconds.
It is possible to lock the hob functions during use, for example in order to clean the hob. The
function remains active even if the hob is turned off and on again.
If there is a power cut, the function is deactivated.
Lock
To activate: press and hold for 1 second.
To deactivate: press .
Each cooking area can be set to an extra power level for 5 minutes at most.
To activate: select one of the 4 cooking areas and select the value "P" on the power bar. The
Boost
corresponding digit displays .
To deactivate: select one of the other possible values on the power bar.
Timer to turn off a specific cooking area after setting the time.
The cooking areas can be programmed individually, as they all have their own Timer.
To activate: With the cooking area in operation, press on the corresponding symbol to access
the Timer management commands for that area.
The 3 digits will show " 0 0 0 ". Press "+" or "-" to set the countdown time.
Hours
Minutes
Cooking
Tenths
areas Timer
Do not touch anything for 10 seconds to confirm the time.
When the countdown ends, the digits return to zero and a buzzer sounds. This can be turned off
by pressing any of the buttons.
If the Timer is active in more than one cooking area the 3 digits will always show the Timer that
is closest to finishing.
To deactivate: With the cooking area in operation, press on the corresponding symbol to
access the Timer management commands for that area.
Set the three digits to " 0 0 0 " using "+" or "-" .