IKEA GRÄNSLÖS Handbuch Seite 13

ENGLISH
Heating func-
tion
Creates the heat directly in
the food. Use it to heat
pre-prepared meals and
Microwave
drinks, to defrost meat or
fruit, and to cook vegeta-
bles and fish.
To turn on the lamp without
a cooking function. It can
be used with residual heat
Light
in final cooking phase to
save energy.
Caution! Use microwave glass
bottom plate only with
Microwave function.
Do not use microwave glass
bottom plate with Microwave
Combi function.
Setting a heating function
1. Remove microwave bottom glass plate.
2. Turn the knob for the heating functions
to select a heating function.
3. Turn the control knob to select the
temperature.
The lamp turns on when the oven operates.
4. To turn off the oven, turn the knobs to
the off position.
Setting the function: Microwave
1. Remove all accessories.
2. Insert microwave bottom glass plate.
3. Turn the knob for the heating functions
to select the function: Microwave
Application
Caution! Use
microwave glass
bottom plate on-
ly with micro-
wave function.
.
Caution! Do not let the oven
operate when there is no food in
it.
The display shows first a default microwave
power and then a default time for:
Duration.
The oven starts to operate after few
seconds automatically without user
interaction.
4. Turn the control knob to change the
microwave power. The power setting
changes in 100 Watt steps.
5. Press and then turn the control knob
to change:Duration.
6. You can change or check microwave
power setting while the function
Microwave is running.Press:
When the time set for Duration ends, the
signal sounds and the oven stops.
7. Turn the knob for the heating functions
to the off position.
When you open the oven door,
the oven stops. To start it again,
close the door and press
Setting the function: Microwave Combi
You can combine the microwave function
with any of the heating functions.
1. Remove microwave bottom glass plate.
2. Turn the knob for the heating functions
to select the function.
Caution! Do not let the oven
operate when there is no food in
it.
The display shows a default temperature.
3. Turn the control knob to change the
temperature.
4. Press to combine heating function
with the microwave mode.
5. Turn the control knob to change the
microwave power settings. The power
setting changes in 100 Watt steps.
13
.
.