VOLTCRAFT TT100 Bedienungsanleitung Seite 34

- Bicolour LED / light-emitting diode (two-colour)
- Diode
- Diode network
• Automatic determination of pin assignment, simply connect it
in any way
• Identification of diode protection and shunt resistors
• Gain measurement for bipolar transistors
• Leakage current measurement for bipolar transistors.
• Silicon and germanium detection for transistors.
• Gate threshold measurement for self-conducting MOSFETs.
• Forward bias measurement of semiconductors for diodes,
LEDS and transistor base-emitter connections.
• Automatic and manual shut down
The signal measured is shown on the display.
The measuring device is operated with a 12 V 23 A battery
No charge/voltage should be connected to the device.
Using the product for any purposes other than those described
above may damage the product and result in a short circuit, fire
or electric shock.
The product must not be modified or reassembled. Do not attempt
to open the device housing.
Measurements must not be made in potentially explosive areas,
damp rooms or outdoor spaces, or in areas with adverse environ-
mental conditions.
34