Switching The Device On And Off - Sartorius Stedim Biotech Sartocheck 3 plus Betriebsanleitung

Fig. 7-3 | Login menu
Fig. 7-4 | Main Menu
7.2

Switching the device ON and OFF

If you want to switch the unit on, proceed as follows:
Before you switch on the power supply and the compressed air, compare the
connection data for the unit (see the Chapter 01 Technical Specifications) with
the data for the mains current and the compressed air supply.
Connect Sartocheck
the wall outlet, install all tubing connections. The unit is now ready for operation.
Login menu
User ID:
Password:
OK:
Cancel:
Important Note:
Name:
Password:
Every operator must log-in before he can activate the Main Menu.
The operator logs in by pressing the "Login" key on the keypad. After pressing
the "Login" key, the user will be asked for his name and password. If both are
correct, then the keypad is activated for use. When the operator stops working with
Sartocheck ® 3 plus, he must always log out by pressing the "Logout" key.
®
Sartocheck 3 plus is then blocked for further operation until another operator
logs in.
Please note that a running integrity test is aborted if the "logout" key is pressed.
Information line with model, version, system number and user name.
Menu display: Main Menu
F1-F8: Select the function menus with the function keys
Help: Selects the Help Menu
Selects the function menus
The Main Menu appears.
– Before starting a test, allow the unit to warm up for about 20-30 min.
For shut-down times < 30 min and constant ambient temperatures, the warm-up
phase can be shortened accordingly. For more information about the tests, see
Chapter 7.3 ff.
– Program the data for the test execution.
– The Sartocheck ® 3 plus is ready to be started (by the registered user).
– Start the test.
Only service technicians or trained personal may install connections and start up
the unit!
® 3 plus to the mains supply by plugging the power cord into
Enter operator's name
Enter operator's password
Confirm correct entry
Delete entry
When Sartocheck ® 3 plus is delivered it is factory set for
the following user:
mentor
mentor
21