Fig. 7-37 | Program database:
Reading in the backup
Fig. 7-38 | Program database:
Reading in the backup
Fig. 7-39 | Program database:
Reading in the backup
34
7.13.4 Reading in the Backup of all Test Programs from the SD Card
(F4 - Program Database)
When reloading backup files, insert the backup diskette in the SD card drive.
If you want to save more than one backup file, open the backup selection list
where you can select the file you want.
When re-saving a backup file, all test programs in the internal memory are
overwritten with the backup files.
Load backup from network (F7) follows the same procedure as from a diskette (F6).