Saving A Backup Of All Test Programs On Sd Card - Sartorius Stedim Biotech Sartocheck 3 plus Betriebsanleitung

Fig. 7-33 | Test program:
Assign memory space
Fig. 7-34 | Program database: Save backup
Fig. 7-35 | Program database: Save backup
Fig. 7-36 | Program database: Save backup
If the memory location number you have selected is already assigned, a warning
will be displayed. With PAGE UP, you can select a new program memory location.
By pressing Enter, the program data already stored in the internal memory will be
overwritten with the new data.
7.13.3 Saving a Backup of all Test Programs on SD Card (F3)
With the backup function, all test programs in the internal memory will be written
on a diskette (F3) and|or the test programs in the internal memory will be rewritten
(F4). Insert the SD card into the disk drive and then press PAGE DOWN.
Only use the backup function for saving data, not for archiving data.
The backup files can only be viewed with a Sartocheck® 3 plus, because a
Sartocheck® 3 plus-specific data compression method is used here. For archiving
your program files we recommend you use the (F1) function "Test programs from
internal memory" -> (F3) "Save on a SD card."
You have to individually name your backup files.
Type in the backup file name and confirm by pressing enter.
Then all data in the program database will be written to the backup file.
If the backup SD-Card already contains a backup file, you must confirm that
the data will be overwritten before saving or cancel the backup routine.
33