Inhaltsverzeichnis
Werbung
ELECTRICAL CONNECTIONS
Caution
Electrical compartment contains live terminals, please ensure supply is
isolated before removing the cover. Any person accessing this part of the
unit should be suitably trained and competent.
Before carrying out any maintenance work, disconnect the drive and the
external control circuits from the power supply by moving the main system
switch to "off". Once power has been disconnected from the drive,
least 5 minutes before disconnecting the electrical cables
230 V / Single phase /
Power supply
Max. absorbed
current without
evaporators (Air
cooled)
Max. absorbed
current without
evaporators (Water
cooled)
If consumers are powered from the condensing unit using the available
circuit breakers, select the main power supply by adding the actual
consumer input current to the above values
General information
–
The machine is designed in accordance with EN60204-1.
–
Supplying cable must be connected on terminal of main switch.
–
All cabling on site must conform to the legal standards in force in
the relevant countries and to EN60204-1.
QUIETCO2OL MT series
QC
QC
30MT
50MT
50 Hz
+ G
13,3 A
20,7 A
12,5 A
19,9 A
wait at
.
QC
QC 100MT
67MT
400 V / 3ph /50 Hz
N + G
27,2 A
18,5 A
26,4 A
16,5 A
QUIETCO2OL LT series
QC 75LT
QC 167LT
230 V / Single
400 V / 3 ph /
phase / 50 Hz
+ G
18,4 A
17,6 A
50 Hz
N + G
31,4 A
31,4 A
69
Werbung
Inhaltsverzeichnis
