Inhaltsverzeichnis
Werbung
COMMISSIONING
–
Do not use other than the designated refrigerant (for
charging, adding or recharging).
–
Prior to electrically connect the facility, make sure that
the AC power line voltage and frequency ratings
correspond to the indications on the identification plate
and the power voltage is within a tolerance of + 10 %
with respect to the rated value.
–
Specific protection is provided according to the neutral
system.
–
Any on-site wiring must comply with the legal
standards in force in the country of installation
(including grounding).
–
Before turning on a device, make sure that:
–
the electric connections have been correctly
made
–
the clamping screws of the various terminals
are correctly tightened
–
Check the possible presence of locking devices
of compressor antivibration elements, and
remove them, if they exist.
65
Werbung
Inhaltsverzeichnis
