Herunterladen Inhalt Inhalt Diese Seite drucken

Electrical Connections; Collegamenti Elettrici - Carrier 40SMC Anweisungen Zur Installation

Inhaltsverzeichnis

Werbung

Wiring diagram / Schema elettrico / Schéma de câblage /
40JS
B
FTP
B
Fig. 18 - Abb. 18
Schalplan / Diagrama del cableado
TAE007
FTP
HEV
40JS
B
FTP
HEV
B

Electrical connections

This kit can be installed on all Satellite
versions 40SMC-40JX-40JS as it is fitted
with three different wiring diagrams and
thermostat connecting cables.
Electrical connections for 40SMC.
- Remove the blue (neutral) cable, which
is connected to the J3 connection of the
card and connect the thermostat cable
(rif
) following the wiring diagram
(fig. 16).
Electrical connections for 40JX.
- Remove the blue (neutral) cable, which
is connected to the P3 connection of the
card and connect the thermostat cable
(rif
) following the wiring diagram
(fig. 17).
Electrical connections for 40JS.
- Connect a blue (neutral) cable (rif
the thermostat to the neutral N in the
terminal block, and then connect the
other blue cable provided with a screw
terminal to the control terminal block
(fig. 18).
• Replace the drain pan and panels
previously removed and reconnect the
unit power supply.
XR82
B
HEV
B
40JS
TAE10
TAE18
B
FTP
B
40JS
) of
8
XR83
B
FTP
HEV
B
TAE12
HEV
40JS

Collegamenti elettrici

Il kit è applicabile alle versioni Satellite
40SMC-40JX-40JS,quindi dotato di tre
diversi schemi elettrici e cavi
connessione termostato.
Collegamenti elettrici per 40SMC.
- Rimuovere il cavo blu (neutro) collegato
alla connessione J3 della scheda e
collegare il cavo termostato (rif
secondo schema (fig. 16).
Collegamenti elettrici per 40JX.
- Rimuovere il cavo blu (neutro) collegato
alla connessione P3 della scheda e
collegare il cavo termostato (rif
secondo schema (fig. 17).
Collegamenti elettrici per 40JS.
- Collegare un cavo blu (neutro) (rif
del termostato al neutro N della
morsettiera, collegare l'altro cavo blu
dotato di morsetto a vite alla morsettiera
del comando secondo schema (fig. 18).
• Rimontare la bacinella e i pannelli
precedentemente tolti e ridare
tensione all'unità.
40JS
)
)
)

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

40jx40js40smc900740smc900840smc9009

Inhaltsverzeichnis