Specifications - Arcam AVR400 Handbuch

specifications

continual improvement policy
Arcam has a policy of continual improvement for its
products. This means that designs and specifications
are subject to change without notice.
Continuous power output, per channel, 8Ω
2 channels driven, 20Hz - 20kHz, <0.02% THD
2 channels driven, 1kHz, 0.2% THD
7 channels driven, 1kHz, 0.2% THD
residual noise & hum
inputs
Line inputs:
nominal sensitivity
Input impedance
Signal/noise ratio (CCIr, 100W)
Preamplifier outputs
nominal output level
Output impedance
THD+n (20Hz—20kHz)
Video inputs
Component video signal/noise
Composite video signal/noise
Headphone output
Maximum output level into 32
Ω
Output impedance
General
Mains voltage
Power consumption (maximum)
Power consumption (idle, typical)
Power consumption (standby)
Dimensions
W x D (including speaker terminals) x H (including feet)
Weight (net)
Weight (packed)
Supplied accessories
E&OE
note: All specification values are typical unless otherwise stated.
100W
125W
90W
<0.3mV
1V, 2V, 4V (user adjustable)
47k
Ω
100dB
1V rMS
560
Ω
-100dB
85dB
70dB
2Vrms
<5
Ω
110–120V or 220–240V, 50 –60Hz
1.5kW (Thermal dissipation approx. 5200 BTU/hour)
100W (Thermal dissipation approx. 340 BTU/hour)
<0.5W
433 x 425 x 171mm
15.5kg
20kg
Mains lead
Cr102 remote control
4 x AAA batteries
Manual
DAB aerial
FM aerial
AM loop aerial
Calibration microphone
e-54