Commissioning; Filling The Stone Container; Inserting The Ceramic Bowl - Sentiotec Concept R combi black Montage- Und Gebrauchsanweisung

Instructions for use for the user

5. Commissioning

5.1. Filling the stone container

WARNING!
Risk of fire due to overheating
If the sauna heater is used without sauna stones, the cabin walls will
become extremely hot. This could cause fires.
● NEVER operate the sauna heater without the sauna stones.
The amount of stones suited to your heater output can be found
in chapter 10. Technical data (see page 24).
1. Wash the stones thoroughly using water and a brush before use. Do not
use any cleaning additives.
2. Before filling the heater with the sauna stones, check them for foreign objects
and remove any remaining packaging.
3. Place the stones in the stone container. Stack the sauna stones loosely so
that air can flow through the gaps.
4. Make sure that the sauna stones do not protrude beyond the edge of the
stone container.

5.2. Inserting the ceramic bowl

● Place the ceramic bowl on the
evaporator tank as shown in the
illustration on the right.
p. 16/26