Configuring The Display Of Set-/Actual Values "A/S; Setting The Temperature/Relative Humidity Display "T/H; Display Background Lighting Setting "Lig - HomeMatic HM-CC-TC Montageanleitung Und Bedienungsanleitung

8.8 Configuring the display set/actual values "A/S"
You can display whether the actual or set temperature should be
displayed under this menu point.
Call up special function "A/S" and confirm with the "OK" button.
Now, you can use the setting dial to choose between "Actual"
(actual temperature) and "Set" (set temperature).
8.9 Setting the temperature/relative humidity display
"T/H"
This menu point can be used for choosing whether the tempera-
ture should be permanently displayed or if the temperature and
humidity should alternate on the display.
Call up special function "T/H" and confirm with the "OK" button.
Use the setting dial to select "ON" for alternating between tem-
perature and humidity and "OFF" for showing the temperature
continuously.
8.10

Display background lighting setting "LIG"

Set the lighting duration for the background lighting after actuat-
ing the button under this menu point.
Call up special function "LIG" and confirm with the "OK" button.
Use the setting dial to set the time for the duration of the display
background lighting after pressing the button (OFF, 5s, 10s, 15s,
20s, 25s). Finalize the entry with the "OK" button.
If the battery is low, the background lighting will not be
activated!
54