Settings For Automatic Mode "Prg - HomeMatic HM-CC-TC Montageanleitung Und Bedienungsanleitung

8.1

Settings for automatic mode "PRG"

The time for automatically switching between the various tem-
perature phases can be changed separately for each weekday,
which enables the adapation to personal lifestyles.
When setting the individual phases, the starting time for the
respective temperature phase is always shown in the top line
of the left-hand margin and indicates the previous temperature
phase automatically with the end time.
You can define up to 24 time phases per day.
Call up special function "PRG".
Press the "OK" button to make the time program settings.
Type of time program:
Use the setting dial to select the day or the days for which the
time program should be changed. The following options are pos-
sible:
Confirm your entry with OK.
Time phase
The display for the first temperature phase time appears. The
starting time, which cannot be changed, is shown in the top line
and the variable end time for ending the first temperature phase
is shown in the bottom line:
49