6.2.4 Rpm 20
6.2.5 Rpm 30
With this parameter the rpm 20 can be set :
The display of the rpm is to be multiplied by a factor of 10. Only the
upper three digits of the value are entered. (e.g. Rpm 1000 - Display
100).
Order of operations
–
Hold down the "Y" key and tap the "E" key.
The parameter menu is turned on.
–
Advance to the desired parameter through repeated pressing of
the "Y" key.
–
Enter the desired rpm with the 0 to 9 keys.
After the entry of the third number the entry is automatically
concluded.
If fewer than 3 numbers are to be entered, conclude the entry with
the "E" key.
With this parameter the rpm 30 can be set :
The display of the rpm is to be multiplied by a factor of 10. Only the
upper three digits of the value are entered. (e.g. Rpm 1000 - Display
100).
Order of operations
–
Hold down the "Y" key and tap the "E" key.
The parameter menu is turned on.
–
Advance to the desired parameter through repeated pressing of
the "Y" key.
–
Enter the desired rpm with the 0 to 9 keys.
After the entry of the third number the entry is automatically
concluded.
If fewer than 3 numbers are to be entered, conclude the entry with
the "E" key.
3
27