6.1.9 Speed Limitation 1
6.1.10 Speed Limitation 2
With this parameter the rpm of the speed limitation 1 is set.
The display of the speed limitation is to be multiplied by a factor of 10.
Only the upper three digits of the value are entered. (e.g. Rpm 1000 -
Display 100).
Order of operations
–
Hold down the "Y" key and tap the "F" key.
The parameter menu is turned on.
–
Advance to the desired parameter through repeated pressing of
the "Y" key.
–
Enter the rpm with the 0 to 9 keys of the key cluster.
After the entry of the third number the entry is automatically
concluded.
If fewer than 3 numbers are to be entered, conclude the entry with
the "E" key.
With this parameter the rpm of the speed limitation 2 is set.
The display of the speed limitation is to be multiplied by a factor of 10.
Only the upper three digits of the value are entered. (e.g. Rpm 1000 -
Display 100).
Order of operations
–
Hold down the "Y" key and tap the "F" key.
The parameter menu is turned on.
–
Advance to the desired parameter through repeated pressing of
the "Y" key.
–
Enter the rpm with the 0 to 9 keys of the key cluster.
After the entry of the third number the entry is automatically
concluded.
If fewer than 3 numbers are to be entered, conclude the entry with
the "E" key.
3
21