Speed Limitation; Maximum Rpm - Dürkopp Adler 550-12-23 Bedienungsanleitung

6.1.11 Speed Limitation 3

6.1.12 Maximum Rpm

22
With this parameter the rpm of the speed limitation 3 is set.
The display of the speed limitation is to be multiplied by a factor of 10.
Only the upper three digits of the value are entered. (e.g. Rpm 1000 -
Display 100).
Order of operations
–
Hold down the "Y" key and tap the "F" key.
The parameter menu is turned on.
–
Advance to the desired parameter through repeated pressing of
the "Y" key.
–
Enter the rpm with the 0 to 9 keys of the key cluster.
After the entry of the third number the entry is automatically
concluded.
If fewer than 3 numbers are to be entered, conclude the entry with
the "E" key.
With this parameter the maximum rpm is set.
The display of the speed limitation is to be multiplied by a factor of 10.
Only the upper three digits of the value are entered. (e.g. Rpm 1000 -
Display 100).
Order of operations
–
Hold down the "Y" key and tap the "F" key.
The parameter menu is turned on.
–
Advance to the desired parameter through repeated pressing of
the "Y" key.
–
Enter the rpm with the 0 to 9 keys of the key cluster.
After the entry of the third number the entry is automatically
concluded.
If fewer than 3 numbers are to be entered, conclude the entry with
the "E" key.