Idle Brake; Stop Flank; First Brake Flank - Dürkopp Adler 550-12-23 Bedienungsanleitung

6.2.16 Idle Brake

6.2.17 Stop Flank

6.2.18 First Brake Flank

With this parameter the braking force of the idle brake can be set.
Order of operations
–
Hold down the "Y" key and tap the "E" key.
The parameter menu is turned on.
–
Advance to the desired parameter through repeated pressing of
the "Y" key.
–
Enter the force of the brake with the 0 to 9 keys.
After the entry of the third number the entry is automatically
concluded.
If fewer than 3 numbers are to be entered, conclude the entry with
the "E" key.
With this parameter the stop flank of the sewing drive can be defined.
Order of operations
–
Hold down the "Y" key and tap the "E" key.
The parameter menu is turned on.
–
Advance to the desired parameter through repeated pressing of
the "Y" key.
–
Enter the stop flank with the 0 to 9 keys.
After the entry of the third number the entry is automatically
concluded.
If fewer than 3 numbers are to be entered, conclude the entry with
the "E" key.
With this parameter the first brake flank of the sewing drive can be
defined.
Order of operations
–
Hold down the "Y" key and tap the "E" key.
The parameter menu is turned on.
–
Advance to the desired parameter through repeated pressing of
the "Y" key.
–
Enter the first brake flank with the 0 to 9 keys.
After the entry of the third number the entry is automatically
concluded.
If fewer than 3 numbers are to be entered, conclude the entry with
the "E" key.
3
33