SOLIS Espresso Master Gebrauchsanleitung Seite 55

Assembling your SOLIS Espresso Master
To reassemble: STEP 1
Insert the storage tray into the base of the machine
and slide towards the back wall. The storage tray
conveniently stores the cleaning tool, stainless steel
filters, measuring/tamping spoon and Quick
Guide when not in use, so they are not misplaced.
Anleitung_Espresso_Master_2.indd 55
STEP 2
Place the Drip Tray full Indicator into the the Drip
Tray and then place the stainless steel grid on top.
Slide the Drip Tray into the base of the machine in
front of the Storage Tray.
STEP 3
Slide the water tank over the drip tray and into
the front opening of the machine and into position
above the storage tray. Ensure the water tank
aligns flush with the sides of the machine.
NOTE: Before each use it is recommended to
complete a water flushing operation, without
ground coffee, to ensure that all internal piping
has been preheated. Refer to Steps 1 and 4 in
'Operating your SOLIS Espresso Master',
page 56 and 57.
E
55
2.12.2009 16:06:56 Uhr