Drawing In And Fastening The Belt - RADEMACHER RolloTron Basis DuoFern1200 Original - Betriebs- Und Montageanleitung

i

10. Drawing in and fastening the belt

1.
Insert the mains plug into the socket.
There is a risk of injury from the reel.
Never reach into the reel compartment when the motor
is running.
2.
Press the Up button until the fastening hook are
easily accessible in the reel compartment.
i
As no end points have been set yet, the drive
will stop as soon as you release the button.
3.
Remove the mains plug again from the socket.
CAUTION!
Reel compartment
Fastening hook
EN
73