Counting Systems With Your Selected Bulk Scales - KERN CFS 300-3 Betriebsanleitung

2.2 Counting systems KERN CCS
In factory the counting system KERN CCS is preconfigured in a way that no
more changes will be necessary.
Bulk material balance KERN KFP

2.3 Counting systems with your selected bulk scales

When attaching a bulk scales (not pre-adjusted by KERN), the following must
be complied with:
 Connect bulk scales with a suitable cable via the second-balance
interface. Interface connection allocation cf. chapter 16
 Adjustment of bulk scales, cf. chapter 13
 Adjustment / linearisation of bulk scales, cf. chapter 14 / 15
Example 1: High-load bulk scales
CFS/CCS-BA-e-1624

Reference balance KERN CFS

Reference balance KERN CFS
11