Piece Counting - KERN PES Serie Betriebsanleitung

10 Piece counting

The piece counting application allows you to count several pieces placed on the
weighing plate.
Before the balance is able to count pieces, it must know the average piece weight, the
so-called reference. For this purpose a certain number of the pieces to count must be
put on the plate. The balance determines the total weight and divides it by the number
of pieces, the so-called reference quantity. Counting is then carried out on the basis of
the calculated average piece weight.
As a rule: The higher the reference quantity the higher the counting exactness.
• Use the [PRINT] key to cancel the quantity setting
• If you use a weighing container, it should be tared before setting
the reference quantity (see chap. 9.3)
TPES-B_TPEJ-B-BA-def-2319

Select weighing application <1. SEt 2>
(selection see chap. 9.4)

The display shows <Pcs>.

Press and hold the [F] key for about 2
seconds.

Display changes to <U. Set>

Release [F] key

The reference quantity is shown and
flashes (in this example: <on 10>)

Use the keys [] and [] (or [TARE/ZERO]
key) to select the desired reference
quantity
on 5 5 items
on 10 10 items
on 30 30 items
on 100 100 items
31