Configuration Of Bulk Scale - KERN CFS 300-3 Betriebsanleitung

13 Configuration of bulk scale

 Changes may only be carried out by trained specialized personnel.
Ex factory, the scales KERN CFS respectively counting systems KERN CCS have
been programmed such that no changes are generally necessary.
But if there are special conditions of use or if as bulk material balance an other
weighing bridge (not preconfigured by KERN) is connected, in the menu block
" " the required settings can be made.
Technical data
Supply voltage:
Max. signal voltage
Zeroing range
Sensitivity
Resistance parameter
Connection
Max. cable length
Connection plug
Navigation in the menu:
 With
or
selected one by one.
 Confirm selected menu item with
setting will be displayed.
 With
bzw.
 Either save with
(model CFS 50K-3).
CFS/CCS-BA-e-1624
(model CFS 50K-3), the individual menu items may be
(model CFS 50K-3) switch over to the available settings.
bzw. (model CFS 50K-3) or reject with
5 VDC
0-20 mV
0-5 mv
> 0.02 μv
87 O Min., 4 x 350 Ω load cell
4 poles
6 meter
9 pin d-subminiature bushing
or (model CFS 50K-3). The current
or
55