KERN CFS 300-3 Betriebsanleitung Seite 127

 Determine the average piece weight (see chap. 10.1 or 10.2), place the
weighing goods and check using the tolerance mark , if the number of the
placed pieces is under, within or above the specified tolerance.
Display of tolerance mark , if weighing goods are under the specified tolerance:
Display of tolerance mark , if weighing goods within the specified tolerance:
Display of tolerance mark , if weighing goods above the specified tolerance:
 For tolerance control, also only one limit value can be set.
 If both limit values are deleted, the tolerance control is deactivated.
 Delete limit values:
When inputting the upper and lower threshold press
the TARE-key.
40
and confirm with
CFS/CCS-BA-e-1624