KERN CFS 300-3 Betriebsanleitung Seite 145

5. Zero adjustment range
Range of loads in which the display will be set to zero after activation.
 Press
on display „0 AUto"; the current adjustment will be
shown.
Select desired setting by
balance returns to the menu.
 Select the next menu point „0 manl" with
6. Manual zero tracking
Range of loads in which the display will be set to zero after
actuation of the zero key.
 Press
, the current setting will be displayed.
Select desired setting by
balance returns to the menu.
 Select next menu point „Pin" with
7. Password for menu access „tECH"
 Press
and input new password with numeric keys.
Confirm with
 Confirm with
successful input, „donE" will be displayed; „FAIL" will be
displayed on faulty input.
 Select the next menu point „GrA" with
8. Local gravitation constant
Adjustment or linearization must be done after configuration.
Implementation of adjustment cf. chapter 14 / linearization cf. chapter 15.
58
and confirm with
and confirm with
and repeat password input.
, the scale will return to its menu. On
Repeat input in this case.
, the
.
, the
.
.
„0 AUto"
Adjustments are only
possible on the
reference scale.
„0 mAnL"

„0 mAnL" „2"

„Pin"
„Pin"

„Pin1" „----„

„Pin2" „----„
„donE"
„GrA"
Not documented
CFS/CCS-BA-e-1624