Tolerance Check For Target Weight - KERN CFS 300-3 Betriebsanleitung

9.1 Tolerance check for target weight

 Press
, the active tolerance weighing mode is indicated.
 If needed, select tolerance control for target weight (PSt nEt) with
(models CFS 50K-3).
 Press the TARE key , which shows the currently set upper threshold.
 To change, input desired value, e.g. 5.500 kg with the numeric keys.
 Confirm with TARE key; the currently adjusted minimum threshold will be
displayed.
 To change, input desired value, e.g. 5,0000 kg with the numeric keys.
 Confirm with TARE key, the tolerance control will start.
The indicator [] above
CFS/CCS-BA-e-1624
Display example model CFS 6K0.1:
appears.
or
37