Herunterladen Diese Seite drucken

CYBEX SOLUTION S-FIX Kurzanleitung Seite 25

Werbung

REMOVING THE COVER FROM THE BOOSTER
Release the 2 press-studs of the seat cover at the front and the back. Now, pull off the
cover over the armrests and along the seat surface.
CLEANING
NOTE! Please wash the cover before you use it the fi rst time. The cover may only be
washed at 30 °C with a delicate wash program. Washing at more than 30°C may result
in discolouration of the cover fabric. Please wash the cover separately from other laundry
and do not dry in the dryer! Never dry the cover in direct sunlight! The plastic parts can be
cleaned with a mild cleaning agent and warm water.
!
WARNING! Never use harsh cleaning agents or bleaches!
HOW TO ACT FOLLOWING AN ACCIDENT
!
WARNING! An accident may cause damage to the child seat that is not identifi able
with the naked eye. Please replace the seat after an accident. In case of doubt,
please consult your dealer or the manufacturer.
PRODUCT LIFESPAN
This child seat has been designed to be able to fulfi ll its intended functions by ordinary use
for a product life span of approx. 9 years. Gradual wear of the plastic, for example caused
by exposure to sunlight (UV), can cause slight deterioration of the product's properties.
Since very high temperature fl uctuations and other unforeseeable stresses are common in
vehicles, it is necessary to observe the following points:
• If the vehicle is directly exposed to strong sunlight for long periods, the child seat must
be removed from the vehicle or covered with a light cloth.
• Check all plastic and metal parts of the seat regularly for damage or change of shape or
colour. If you notice any change in the child seat, the seat must be disposed or checked
and possibly replaced by the manufacturer.
• Changes to the fabric, especially fading, are normal when used in a vehicle and do not
impair the seat's function.
RIMOZIONE DELLA FODERA DALLA SUPERFICIE DI SEDUTA
Sbloccare i due bottoni automatici anteriori e posteriori della fodera del sedile. Estrarre ora
la fodera oltre i braccioli e lungo la superfi cie di seduta.
PULIZIA
NOTA BENE! Consigliamo il lavaggio prima del primo utilizzo. La fodera è lavabile solo
a 30 °C con un programma di lavaggio delicato. Il lavaggio oltre i 30 °C può causare lo
scolorimento del tessuto della fodera. Lavare la fodera separatamente dagli altri capi e non
asciugare in asciugatrice! Non fare mai asciugare la fodera alla luce solare diretta! Le parti
in plastica possono essere pulite con un detergente delicato e dell'acqua tiepida.
!
ATTENZIONE! Non usare mai detergenti aggressivi o candeggine!
COME PROCEDERE IN SEGUITO A UN INCIDENTE
!
ATTENZIONE! Un incidente può causare danni al seggiolino non identificabili a
occhio nudo. Sostituire il seggiolino dopo un incidente. In caso di dubbio, consultare
il proprio rivenditore o il produttore.
VITA UTILE DEL PRODOTTO
Questo seggiolino è progettato per soddisfare le proprie specifi che l'intera vita utile, pari
a circa 9 anni. Nel tempo le parti in plastica tendono ad usurarsi, es. per l'esposizione al
sole (UV) e le caratteristiche del prodotto possono subire leggere variazioni. Alla luce delle
possibili fl uttuazioni massicce di temperatura e degli sforzi imprevedili nei veicoli, devono
essere tenuti in considerazione i punti seguenti:
• Se il veicolo viene lasciato al sole per un periodo di tempo prolungato, il seggiolino deve
essere rimosso dall'abitacolo o coperto con un panno chiaro.
• Controllare regolarmente tutte le parti di plastica e metallo del seggiolino alla ricerca di
danni, deformazioni o cambiamenti di colore. Qualora si scopra qualsiasi cambiamento,
il seggiolino dovrà essere smaltito o controllato e, possibilmente, sostituito dal
produttore.
• Le variazioni del tessuto, in particolare la scoloritura, sono perfettamente normali in caso
di uso di un veicolo e non intaccano il funzionamento del seggiolino.
25

Werbung

loading