Assembly Instructions - SPORTSTECH DFT500 Benutzerhandbuch

Please pay attention to the following procedures to correctly assemble Plate Frames (7 &
8) and Bottom Frame (2).
Step 1:
Fold the front post up.
Step 2:
Hold and lean the front post forward slightly; keep it at leaning position and press Plate Frames (7
& 8) down as shown in Fig. 1, make sure to closely and flatly overlap the Plate Frame with Bottom
Frame (2) and tighten Knob & washer (A) as shown in Fig. 2.
Fig. 1
1
PLATE FRAME (7)
2
PLATE FRAME (8)
f åÅçê êÉÅí
Plate Frames (7 & 8) and Bottom Frame
(2) are not closely and flatly overlapped.

ASSEMBLY INSTRUCTIONS

BOTTOM FRAME (2)
52
Fig. 2
PLATE FRAME (7)
PLATE FRAME (8) BOTTOM FRAME (2)
` çê êÉÅí
Plate Frames (7 & 8) and Bottom Frame
(2) are closely and flatly overlapped.
3