When And How To Maintain Yourtreadmill - SPORTSTECH DFT500 Benutzerhandbuch

WHEN AND HOW TO MAINTAIN YOUR TREADMILL?
ITEM DAILY (Before Use)
Examine if the frame
is stable for exercise.
Adjust balancer to
Machine
make it stably positi-
Itself
oned on the
ground.
Assure enough safe
space around the
Location machine, and make
sure no dangerous
objects around.
Assure power cable is
Power well-plugged and not
Cable pressed by the
machine.
Assure no bjects
on the belt, and run
the machine at 3~5
Running
kph to see if the belt
Belt drifts. Please refer
to " ALIGNING THE
RUNNING BELT" to
adjust.
Check if running belt
Running
is slipping. Please
Belt
refer to "ADJUSTING
Tension
RUNNING BELT
Adjustment
TENSION" to adjust it.
Lubrication
of Running
Belt
Location
Power
Cable
The Inside
of Motor
Cover
Turn the power on
Safety and remove safety
Key key to check if it is
in normal function.
DAILY (After Use) WEEKLY
Use dry cloth to
wipe and clear
sweat and dust
on the surface of
machine.
Use wet cloth to Vacuum dust
clean the ground. at the bottom
Do not put wax on and around the
the ground. machine.
Turn off the power
or unplug power
cable.
Use dry cloth to
wipe and clear the
surface of running
belt.
Make sure safety
key is re-placed
on the console.
77
MONTHLY 3 MONTHS
Use damp cloth to
clean. (Do not use
Solubility Cleaners.)
Use water for plastic
parts. Use ilicone
oil or wax for etal
parts.
Use dry cloth to
Use damp cloth to
clean (Do not use
Solubility Cleaners).
Use JK's lubricant
silicone oil to
lubricate whenever
reaching 180km.
Please refer to
"RUNNING DECK
LUBRICATION".
Check if they are
well-fixed and make
sure no breakdown
on the panel.
Check if all bolts are
firmly fastened and
no rusting.
6 MONTHS
Open motor co-
ver and vacuum
all dust.