Master Console Button Operation; Enter Button; Start Button - SPORTSTECH DFT500 Benutzerhandbuch

MASTER CONSOLE BUTTON OPERATION

SPEED BUTTON:
1). To choose program & level (Manual, P1 ~ P12, H1 ~ H3, U1 ~ U2, L1 ~ L3)
2). To increase or decrease speed
3). To do adjustment of set data

ENTER BUTTON:

Push to confirm set data

START BUTTON:

To start the machine
FIGURE BUTTON:
1. For quick speed adjustment, press figure then press SPEED button. Ex: Press 8 then press
SPEED, speed is adjusted to 8.0 kph. Press 16 then press SPEED, speed is adjusted to 16.0
kph.
2. For quick incline adjustment, press figure then press INCLINE button. Ex: Press 5 then press
INCLINE, incline is adjusted to 5%.
3. For quick selection of program, press figure then press ENTER
Ex: MANUAL: Press 0 then press ENTER
P1: Press 1 then press ENTER
P12: Press 1 & 2 then press ENTER
H1 (P13): Press 1 & 4, then press ENTER
H3 (P15): Press 1 & 5, then press ENTER
U1 (P16): Press 1 & 6, then press ENTER
U2 (P17): Press 1 & 7, then press ENTER
5. RESET BUTTON
1. In Stop mode, press RESET button to resume to standby mode.
2. In selecting program, press RESET button to resume to standby mode.
3. In setting data, press RESET button to resume to default setting.
6. STOP BUTTON
1. Press Stop button to pause, incline will descend to 0%. Press Start button to restart, machine
runs from originally set incline, speed from 0.8 kph.
2. 20 minutes after pause mode, whole system will be reset.
64