Troubleshooting - Elektra Beckum KS 210 Betriebsanleitung

Trouble shooting
A
Danger!
Prior to any servicing:
− Switch machine OFF.
− Unplug power cable.
− Wait for saw blade to come to standstill.
Check to see that all safety devices are operational
after any servicing.
Motor does not run
No supply voltage
Carbon brushes worn
Loss of cutting performance
Saw blade dull (possi-
bly tempering marks
on blade body)
Unsuitable saw blade
Saw blade warped
Saw vibrates heavily
Saw blade warped
Saw blade not properly
installed
Saw rocks
Fastening screws
loose
Turntable does not turn smoothly
Chips under turntable
Fence bend
KS 210 / KS 210 HM Plus
Check cables, plug,
outlet and mains fuse.
Replaces carbon
brushes.
Replace saw blade
(see „Saw blade
change").
Replace saw blade
(see „Saw blade
change").
Mount saw blade prop-
erly
(see „Saw blade
change").
Retighten fastening
screws.
Vacuum.
Install a straight fence.
2.27