Overheat Protection; Before First Use - Gastroback ADVANCED THERMO Bedienungsanleitung

Note:
If the appliance is idle for more than 30 seconds, the display will get dark automatical-
ly to save energy. You can reactivate the display at any time by touching any button.

OVERHEAT PROTECTION

The »Design Water Kettle Advanced Thermo« is fitted with a self-resetting overheat pro-
tection device, which safeguards against overheating of the heating plate. Overheating
may be caused by ...
• too much scale on the heating plate. De-scale the kettle in time (see: 'Care and Clea-
ning').
• too little water in the kettle. Always fill at least 0.2 litres (1 large coffee cup) into
the kettle, before placing the kettle onto the power base. Keep in mind, that water will
vaporize, when left on high temperature for a long time in the kettle while the lid is open.
Always keep the lid closed during operation.
If overheating occurs, the kettle will automatically switch off the heating plate. In this
case, remove the kettle from the power base and pour out the water. Then leave the
kettle cool down by waiting approx. 15 minutes. Thereafter, you can reactivate the
appliance.

BEFORE FIRST USE

DO NOT let young children play with the appliance, or any part of
WARNING:
it, or the packaging!
1. Unpack the appliance and all accessories carefully and check that no parts are
damaged or missing.
Carefully remove all shipping materials and promotional materials, but DO NOT
remove the warning labels or model label. Especially ensure that there are no foreign
objects (e.g. packaging) in the kettle.
2. Before first use and after a longer period of storage, rinse the kettle thoroughly.
3. The power cord of the power base is intentionally short to avoid that anyone will get
entangled in the power cord or pull the power base by the power cord. To avoid
loops, if the power cord is still too long, you may wind 1 turn (at the maximum!) of
the power cord loosely around the cord storage at the bottom of the power base.
Then guide the power cord through the notch in the rim to the power base bottom.
WARNING:
Do not wind NO MORE THAN 1 TURN around the power cord sto-
rage to avoid overheating, electric shock, and fire.
31