Herunterladen Inhalt Inhalt Diese Seite drucken

Start Up - Kärcher HDS 2000 Super Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für HDS 2000 Super:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Overflow valve with two pressure
switches
– While reducing the water supply/quanti-
ty regulation at the hand spray gun, the
overflow valve opens and part of the
water flows back to the pump suck side.
– If the hand-spray gun is closed, so that
the whole water flows back to the pump
suck side, the pressure switch at the
overflow valve shuts down the pump.
– If the hand spray gun is opened, the
pressure switch on the cylinder head
turns the pump back on.
The overflow valve is set by the manufac-
turer and sealed. Setting only by customer
service.
Safety valve
– The safety valve opens when the over-
flow valve is defective.
The safety valve is set by the manufacturer
and sealed. Setting only by customer ser-
vice.
Water shortage safeguard
– The water shortage safeguard prevents
the burner to be turned on when there is
water shortage.
– A sieve prevents the contamination of
the safeguard and must be cleaned reg-
ular.

Start up

WARNING
Risk of injury! Appliance, accessories, sup-
ply lines and connections must be in fault-
free condition. If they are not in a perfect
state then the appliance must not be used.
 Lock parking brakes.
Installing the handle
Figure 4
 Reattach both handle bows to the appli-
ance.
Install the hand-spray gun, the jet
pipe, the nozzle and the high
Note: The EASY!Lock system joins com-
ponents with a quick-fasten thread solidly
and securely with just one turn.
Figure 5
 Join the spray lance with the trigger gun
and tighten until hand-tight
(EASY!Lock).
 Insert the high pressure nozzle onto the
spray lance.
 Install union nut and hand-tighten it
(EASY!Lock).
 Join the high-pressure hose with trigger
gun and high-pressure connection of
the appliance and tighten until hand-
tight (EASY!Lock).
Check oil level of the high pressure
 Open the device hood.
 Cut off the tips of the oil container lid.
 Check oil level in the oil tanks.
 Do not operate the appliance if the oil
level has fallen below "MIN".
 Add oil if required (see technical speci-
fications).
DANGER
Danger of explosion! Only refill diesel oil or
light fuel oil. Inappropriate fuels, e.g. petrol,
must not be used.
ATTENTION
Risk of damage! Never operate device with
an empty fuel tank. The fuel pump will oth-
erwise be destroyed.
 Refill fuel.
 Close tank lock.
 Wipe off spilled fuel.
– 4
EN
pressure hose
pump
Refill fuel
23

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis