VOLTCRAFT 23 87 82 Bedienungsanleitung Seite 54

Call the item "THRUST CALC . . ." in the menu structure
and activate your selection with "ENTER".
The display shows the thrust calculation display, with
the first figure being highlighted by a black background
already for entering the propeller diameter.
Use the "ENTER" button to switch between the avail-
able figures step by step. If the desired numeric value is
set, you can use the button "MODE" to switch to the
next number and again set the desired value with
"ENTER".
Repeat the process until all values are entered cor-
rectly. The bottom left of the display then indicates the
thrust achieved in kg and Lb.
Use the "BACK/ESC" button to exit the thrust calculator
function and return to the menu structure.
Figure 18
54