Call the item "TACHOMETER RPM" in the menu
structure and activate the selection with "ENTER".
The display shows the tachometer function and the
number of propeller/rotor blades.
Use the button "MODE" to set the number of propellers/
rotor blades from 1 - 5. Every push of a button will move
one figure forwards. After figure 5, the next push of a
button will return to figure 1.
After the setting is made, the button "ENTER" is pressed
and the 7 in 1 multimeter shows the current and maxi-
mum speed.
Now hold the 7 in 1 multimeter close to the propeller
circle according to figure 14 and perform the speed
measurement.
Use the "BACK/ESC" button to exit the speed measure-
ment function and return to the menu structure.
Figure 15
51