GRAUPNER S.M.S. EMDEN Betriebsanleitung Seite 16

•
Connect the parallel battery lead, Order No. 3061,
to the speed controller. Place the batteries in the
model, connect them to the parallel lead and
check the working systems. The batteries must be
fixed securely, so that they cannot slip out of
position when the boat is running. It is a good idea
to attach a piece of Velcro tape to each of the
batteries and the deck; this will prevent them
shifting.
•
Replace the hatch cover and the superstructure
on the model and carefully connect the funnel
rigging again. NOTE: take care not to trap the
rigging under the superstructure (see photo). TIP:
it is easiest to fit the rigging using a pair of
tweezers.
•
Suspend the ship's boats in the davits, as shown
in the photos. TIP: once the boats are in place,
squeeze the hooks together gently so that they
cannot fall off when the boat is running.
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! Liability for printing errors excluded. We reserve the right to introduce modifications. Sous réserve de
modifications! Nous ne sommes pas responsables d'éventuelles erreurs d'impression! #0058124
16
06/2007