Novasina AW SPRINT Bedienungsanleitung Seite 58

Position 1 2 3
Parameter T T T
Example 2 5
58
Connection to a PC Connection to a PC Connection to a PC
Connection to a PC Connection to a PC
The connection to a PC is made by means of the shielded RS232 cable
supplied, or by means of another commercially available (non-crossed)
cable.
The Novasina "Novalog32" software, which runs under Windows 95/98/
2000/NT/XP, may be used to evaluate the measured data set.
The data string always consists of 22 characters, and is structured as
follows:
4 5 6 7 8 9
T T T F F
. 0 C 8
T: Temperature in °C
F: Relative humidity in %rh
S: Status of analysis mode
– START: Analysis mode started
– ANAL.: Analysis mode is active
– STAB.: Stability criterion just reached. In the next data string the status output
– ABORT: Analysis mode was interrupted by pressing the <Stop> key. In the
C: Carriage return (CR)
L: line feed (LF)
Configuration of the RS232 interface Configuration of the RS232 interface Configuration of the RS232 interface Configuration of the RS232 interface Configuration of the RS232 interface
The interface for printing out the measured data or for data transfer to a PC
is configured in the menu mode (see chapter 5).
10 11 12 13 14 15 16 17 18 19 20 21 22
F F F F
3 . 5 %
changes to "____."
next data string the status output changes to "____."
S S S S S C
S T A R T
L