Printing Out Measurement Protocol - Novasina AW SPRINT Bedienungsanleitung

4.3 4.3 4.3 4.3 4.3 Printing out measurement pr Printing out measur Printing out measur Printing out measur Printing out measur
42
Removing the measured sample Removing the measured sample Removing the measured sample
Removing the measured sample Removing the measured sample
• Open the instrument cover.
• Rotate the measuring head anti-clockwise as far as the stop and lift off.
• Remove the plastic sample bowl from the measuring chamber.
• Close the plastic sample bowl with its cover and remove it together with
the metal measuring bowl.
Note: the measuring bowl is fixed with 2 snap-in balls. If the fixing is too
strong, close the measuring head again and lift up the complete unit.
Open the head and tip out the closed bowl.
• Place back the measuring bowl and perhaps close the measuring head.
Note: if heavy concentrations of glycol, glycerin, acetic acid etc. were
present in the sample, then leave the head open to let the cell recover
in the air.
• Close the instrument cover.
Note: Leave the measuring instrument switched on so that it is ready for
measuring at any time. Because of the low power consumption it can be
continuously operated without problem.
ement pr ement pr ement protocol ement pr otocol otocol otocol otocol
If a printer is connected to the Novasina AW SPRINT, and is correctly
configured, the appropriate protocol can be printed out by pressing the
<Stable> or <Actual> keys for a long time (for at least 2 seconds).
Note: if the instrument is set to automatic printer mode "Printer aut." (see
chapter 5.5), the stable-protocol will be printed out automatically, as soon
as stability is reached (green LED "OK" is lit).
"Stable" protocol
****************************************
* N O V A S I N
* RTD-502 SW version: 3.13
****************************************
Product: ...............................
Batch no.: .............................
Date: ............. Time: ..............
Laboratory: ............................
Duration: 00:05:50
Temperature: 24.9°C
Stable (1): 0.769aw
Offset: 0.000aw
-------
Extrapolated: 0.769aw
=======
"Actual" protocol
****************************************
A * * N O
*
* RTD-502
****************************************
Product: ...............................
Batch no.: .............................
Date: ............. Time: ..............
Laboratory: ............................
Duration:
Temperature:
V A S I N A *
SW version: 3.13 *
00:12:60
25.0°C