Novasina AW SPRINT Bedienungsanleitung Seite 44

** NOVASINA **
~0.316aw 25.0•C
#01:Stab.options
submenu...
#01:Stab.options
submenu...
01:Stab. par.
1
01:Stab. par.
1
01:Stab. par.
Set 1
01:Stab. par.
3
44
Calling and quitting the menu mode Calling and quitting the menu mode Calling and quitting the menu mode
Calling and quitting the menu mode Calling and quitting the menu mode
The starting point for calling the menu mode is the standby mode.
• To call the menu mode, press the <Menu/ESC> key, and the first main
menu point appears on the display. The red "Menu" LED flashes.
Note: Main menu points are identified by the "#" symbol and the corre-
sponding number (e.g. "#01").
To quit the menu mode again, press the <Menu/ESC> key again. The
instrument then returns to the standby mode.
Calling and quitting submenus Calling and quitting submenus Calling and quitting submenus Calling and quitting submenus Calling and quitting submenus
Individual menu points in the main menu have a submenu.
• To call the submenu, press <Enter> in the corresponding main menu
point. The instrument is now in the submenu and the first submenu
point is displayed.
Note: Submenu points are identified by the number of the corre-
sponding main menu (e.g. "01").
To quit the submenu again, press the <Menu/ESC> key. The instru-
ment then returns to the main menu.
Selecting menu points in the main menu and submenu Selecting menu points in the main menu and submenu Selecting menu points in the main menu and submenu Selecting menu points in the main menu and submenu Selecting menu points in the main menu and submenu
Select the menu points in the appropriate menu with the keys < > (next
menu point) and < > (previous menu point) keys.
Changing setpoints in menu points Changing setpoints in menu points Changing setpoints in menu points Changing setpoints in menu points Changing setpoints in menu points
• To change the setpoint in a menu point (e.g. the humidity stability
factor), press <Enter>.
• The word "Set" on the second line of the display indicates that the value
can now be changed or can be toggled between two possible selection
values. This is done by pressing the keys < > (increase value) and
< > (reduce value).
• After the change is made, confirm the new setpoint by pressing <Enter>.
Note: The menu point can be quit at any time by pressing the <Menu/ESC>
key. The setting last confirmed with <Enter> is retained.