Removing And Fitting The Battery; Fitting The Battery; Removing The Battery; Switching The Blower On/Off - Stihl BGA 56 Gebrauchsanleitung

English
8

Removing and Fitting the Battery

8.1

Fitting the Battery

1
2
► Insert the battery (1) in the battery compartment and press
it home until it engages with an audible click.
Arrows (3) on battery (1) are still visible and battery (1) is
held securely in battery compartment (2). No electrical
contact between blower and battery (1).
► Push the battery (1) into the battery compartment (2) as far
as stop.
The battery (1) engages with a second click and is flush
with the blower's housing. Blower is ready for operation.
8.2

Removing the Battery

► Stand the blower on a level surface.
► Hold one hand in front of the battery compartment to
ensure the battery does not fall out.
36
3
► Press the locking lever (1) with your other hand.
The battery (2) is unlocked and can be removed.
9

Switching the Blower On/Off

9.1

Switching On

► Hold the blower with one hand on the control handle - wrap
you thumb around the handle.
► Pull the trigger with your index finger and hold it there.
Air flows from the nozzle.
8 Removing and Fitting the Battery
1
2
BGA 56