Matrix 310.550.320 Originalbetriebsanleitung Seite 44

The exhaust of internal combustion engines is
poisonous and can lead to suffocation, among
others. It is not allowed to operate the petrol
cutting blade in closed or poorly ventilated
rooms.
Refill the gasoline tank only outdoors, or in well-
ventilated areas.
Gasoline and gasoline vapors are highly
flammable. Keep away from flammable materials
and sources of ignition, such as ovens or stoves.
Do not smoke while refueling or operating the
tool.
Immediately wipe away spilled gasoline.
Start the petrol cutting blade only at a location
far away from the place of refueling.
Always make sure that the cover of the fuel tank
is well closed. Look out for possible leakage.
When the engine is running or the engine is hot,
it is not allowed to open the cap of the fuel tank
or refill gasoline.
Open the cap of the fuel tank slowly so that
gasoline vapor can escape.
Make sure the handles are dry, clean, and free of
gasoline mixed with oil.
Do not use the tool without exhaust pipe and
when the exhaust pipe guard is not properly
installed.
Do not touch the exhaust pipe, there is a risk of
burns.
Only use the fuel recommended in the manual.
Keep gasoline only in containers designed for it,
and store it at a safe location.
While cutting on a slope, always stand below the
cutting tool.
44
Always make sure no objects or other debris is
collecting in the trimmer head, in the protective
hood, or in the engine.
Always switch off the tool before you put it down.
Do not use any wire, or anything similar in the
line spool.
Only work during daylight, or when the area is
illuminated well using lighting.
Subject the tool to a visual inspection before
each use.
Check, if all screws and connecting parts are
tightened.
Always use both hands to hold the tool.
Check the tool, and its components and guards
for damages, or wear and tear before each use,
and have it repaired, if necessary. Never make the
devices for protection and safety inoperable. Do
not use the tool, when damages or signs of wear
become apparent.
Keep the tools clean and fully functional to
ensure better and safer work.
Always maintain a safe distance between the tool
and your body during work.
Always switch off the tool when work will be
interrupted or the location will be changed; wait
until the cutting tools have completely stopped,
and turn off the engine.
Never leave the tool without supervision at the
place of work. Store the tool at a safe place when
work will be interrupted.
Persons operating the machine must not be
distracted, or one may lose control over the tool.
Never use the tool during rain, in a humid or wet
environment, and do not store it outdoors.