Matrix 310.550.320 Originalbetriebsanleitung Seite 48

misuse.
The user/operator and not the manufacturer will
be liable for any damage or injuries of any kind
which result from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the equipment is used in commercial,
trade or industrial businesses or for equivalent
purposes.
The device must not be used for any other
purpose.
Important!
Do not start the chainsaw until it has been fully
assembled and the chain tension has been
adjusted.
Always wear protective gloves when working on
the chainsaw to protect your against injury.
The operating and installation instructions should
comply with the maintenance requirements.
Specifications
Motor:
Motor type: Air-cooled 2-stroke engine
Max. power output:
Piston capacity:
Max. engine speed:
Tank capacity:
Starting system:
Idle speed:
Clutch engaged speed:
Specific fuel consumption ( according to ISO
8893)
At max. engine power:
Carburetor:
Spark plug:
Mixing ratio:
Pole saw:
48
0.9kw
3
32.6 cm
-1
9800 min
0.9L
recoil starter
-1
3000 min
-1
4300min
660g/kWh
WYK 394/Walbro;
SK-C33/SS Sunseeker;
Sunseeker SK-C33E/SS
BM6A(TORCH);
L8RTC(TORCH);
L8RTF(NHSP LD);
BPMR7A(NGK);
RCJ6Y(CHAMPION)
40:1
Weight with empty tank and chain:
Oil tank volume:
Cutting length:
Chain pitch:
Chain thickness:
Sprocket:
Chain type: 91VG039X/OREGON;91PJ040X/
OREGON;3/8.50-39/KANGXIN
Guide bar type: 100SDEA074/OREGON;
100SDEA318/OREGON;AL10-39-507P/KANGXIN
Max. engine speed with chain saw:
Ratio:
Guaranteed sound power level:
(according to 2000/14/EC)
Sound pressure level (according to EN ISO
11680-1, Annex B)
Uncertainty K:
Vibration (according to EN ISO 11680-1, Annex C)
Uncertainty K:
Brush cutter and lawn trimmer
Weight without cutting equipment with an
empty tank 6.3 kg
Weight with special cutting equipment, empty
tank: 7.2 kg
Weight with special cutting equipment, fuel tank:
7,8 kg
Cutting diameter: 255 mm (brush cutter) 430 mm
(lawn trimmer)
Thickness / diameter of the cutting rates: 1.4 mm
(metal blade) / Ø 2.4 mm (flexible line)
Number of cutting teeth:
A portion (three teeth metal blade) / 2 (flexible
line)
Center hole diameter of the cutting blade:
25.4mm
Rotational speed of the cutting accessory at max.
Engine speed:
-1
7200 min (brush cutter)
-1
5900 min (lawn trimmer)
Gear ratio: 19:14
Noise level according to EN ISO 22868
Sound pressure level (brush cutter), L
7.9kg
3
125cm
254mm
9.525mm
1.27mm
7T X 9.525mm;
-1
9500 min
18:17
L 114 dB (A)
WA
L : 92 dB (A)
pA
3 dB
2
a : 5 m/s
h, w
2
1.5 m/s
:
pA,av
89.2 dB (A)