Matrix 310.550.320 Originalbetriebsanleitung Seite 59

4.7 double strap assembly
Part 7: Mounting:
The Combined gasoline grass trimmer, pole
saw, brush cutter must be used with the strap
(9). Balance the machine when the tool is
9
switched off.
- Wear the shoulder strap (9).
2
- Adjust the strap length so that the snap
hook (b) is about a hand's breadth below the
right hip.
- Hang the petrol brush cutter on a hook.
- hang the machine. When standing in a
normal working posture, The blade should
touch the ground during normal working
position.
-You may use an Allen key to loosen the
bracket, if necessary, and shift forwards or
backwards.
Thereby, it is important that the petrol brush
cutter is always well balanced.
For operation, hook the petrol brush cutter
into the snap hook (b) of the carrying strap
while the engine is running.
ATTENTION! In an emergency, the safety
latch (c) can be pulled from the harness (9).
9
The machine then detaches immediately from
the carrying strap (9) and falls to the ground.
b
2
c
A13
59