Technical Specifications; Angle Grinder; Safety Precautions - Protool AGP 230-22 Bedienungsanleitung

Technical specifications

Angle Grinder

Type
Voltage
Frequency
Power consumption
Idle number of revolutions
Grinding wheel ∅
Peripheral speed
Grinding spindle thread
Starting current reduction
Self-balancing unit
Weight
Protection class
Controls
1. On/Off switch
2. Safety lock-off button/Lock-on button/Lever
3. Ventilation holes
4. Spindle locking pin
5. Gearbox
6. Spindle collar
7. Grinder spindle
8. Auxiliary handle
9. Guard
10. Guiding pad
11. Clamping lever
12. Ensioning nut
13. Lower flange (AGP 230-22, AGP 230-26)
14. Grinding disc
15. Clamping nut
16. Wrench
17. Self-balancing unit
(AGP 230-22 AB, AGP 230-26 AB)
18. Quick-action nut (FASTFIX)
Not all of the accessories illustrated or described
are included as standard delivery.
Use
The machine is designed for splitting, roughing
and brushing metal and stone materials without
the use of water. For cutting stone, a cutting
guide is required.
The user himself is liable for any improper use.
AGP 230-22 AGP 230-26
230 – 240 V 230 – 240 V
50/60 Hz 50/60 Hz
2200 W 2600 W
6600 min 6600 min
–1 –1
max. 230 mm max. 230 mm
80 m.s 80 m.s
–1 –1
M 14 M 14
• •
– –
5,8 kg 5,8 kg
II / II /

Safety precautions

a) This power tool is intended to function as
a grinder, sander, wire brush, or cut-off tool.
Read all safety warnings, instructions, illus-
trations and specifications provided with
this power tool. Failure to follow all instructions
listed below may result in electric shock, fire
and/or serious injury.
b) Operations as polishing are not recom-
mended to be performed with this power
tool. Operations for which the power tool was
not designed may create a hazard and cause
personal injury.
c) Do not use accessories which are not
specifically designed and recommended by
the tool manufacturer. Just because the
accessory can be attached to your power tool, it
does not assure safe operation.
d) The rated speed of the accessory must be
at least equal to the maximum speed marked
on the power tool. A ccessories running faster
than their rated speed can break and fly apart.
e) The outside diameter and the thickness of
your accessory must be within the capacity
rating of your power tool. Incorrectly sized
accessories cannot be adequately guarded or
controlled.
f) The arbour size of wheels, flanges, backing
pads or any other accessory must properly
fit the spindle of the power tool. Accessories
AGP 230-22 AB AGP 230-26 AB
230 – 240 V 230 – 240 V
50/60 Hz 50/60 Hz
2200 W 2600 W
6600 min 6600 min
–1
max. 230 mm max. 230 mm
80 m.s 80 m.s
–1
M 14 M 14
• •
• •
5,9 kg 5,9 kg
II / II /
For safe operation of the grinder,
the operating and safety precau-
tions must be thoroughly read and
strictly observed.
GB
–1
–1
11