Quick Reference; Description Of The Appliance - Kärcher SC 1.050 Originalbetriebsanleitung

Safety Devices
Caution
Safety devices protect the user and must not be
modified or bypassed.
Pressure controller
The pressure controller keeps the boiler pres-
sure during the operation as constant as possi-
ble. The heating is turned off if the maximum
operating pressure of 4 bar is reached in the boil-
er and is reactivated in case of a pressure drop
in the boiler due to steam tapping.
Safety thermostat
The safety thermostat turns off the appliance if
the pressure controller fails and the appliance
overheats in case of a malfunction. Please con-
tact your local KÄRCHER customer service to
arrange for the reset of the safety thermostat.
Safety lock
The safety lock seals the boiler against the
steam pressure that builds up in the boiler. If the
pressure controller is defect and the steam pres-
sure in the boiler rises, a pressure control valve
in the safety lock opens, and steam is emitted
through the lock to the outside.
Please contact your local KÄRCHER customer
service before you put the appliance into opera-
tion again.

Description of the Appliance

The scope of delivery of your appliance is illus-
trated on the packaging. Check the contents of
the appliance for completeness when unpack-
ing.
In the event of missing accessories or any trans-
port damage, please contact your dealer.

Illustrations on fold-out page!
A1 Indicator lamp (green) –
line voltage is on
A2 Indicator lamp - heater (ORANGE)
A3 Safety cap
A4 Holder for accessories
A5 Storage holder for floor nozzle
A6 Mains cable with mains plug
A7 Running wheels (2 ea.)
A8 Steering roller
B1 Steam gun
B2 Unlocking button
B3 Selector switch for the steam volume (with
child protection)
B4 Steam lever
B5 Steam hose
14
C1 Detail nozzle
C2 Steam turbo brush
C3 Round brush
D1 Hand nozzle
D2 Terry cloth cover
D3 Microfibre abrasive cover
E1 Extension tubes (two tubes)
E2 Unlocking button
F1 Floor nozzle
F2 Retaining clip
F3 Terry floor cloth

Quick Reference


Illustrations on Page 2
1 Unscrew the safety lock and fill the steam
cleaner with a max. of 1 litre of water.
2 Screw in safety cap.
3 Plug in the main plug.
The green and orange indicator lamps light
up.
4 Wait until the orange indicator lamp goes
out.
5 Connect the accessories to the steam gun.
The steam cleaner is ready to use.
Attaching the Accessories
Illustration

Insert steering roller and transport wheels
and lock them.
Illustration

Connect the required accessories (see
Chapter "How to use the accessories") to the
steam gun. Insert the open end of the acces-
sory on the steam gun and push onto the
steam gun until the unlocking button of the
steam gun locks into place.
Illustration

Use the extension tubes if necessary. To do
so, connect one or both extension tubes to
the steam gun. Insert the required accesso-
ries on the free end of the extension tube.
Removing the Accessories
Danger
Hot water may drip out of the accessory parts
while you are detaching them! Never detach ac-
cessory parts while steam streams out - risk of
scalding!

Move the selector switch for the steam vol-
ume back (steam lever locked).
– 7
EN
(5x)
(2x)
Operation