Settings; Service Functions - Auerswald VoIP/ISDN Installations- Und Bedienungshandbuch

38

Settings

works with dynamically assigned WAN IP
addresses.
The device's default setting is configured to use
dynamic WAN IP addresses.
STUN server / operation with dynamic WAN IP
address:
A STUN server is used to determine the external
WAN IP address of the DSL router while consider-
ing an existing firewall. The WAN IP address is
required for communicating with the SIP providers.
User name:
Here you can enter a new user name for the
administrator. The factory default for the user-
name is „admin".
Password:
Here you can enter a new password for the admin-
istrator. In the second input field you have to enter
the password again to confirm. The factory default
for the password is „admin".
Country code:
To comply with country-specific requirements you
have to select the desired country here. If you do
not find the desired country in the list, select „INT".
The country selection does not deter-
mine the language. You set this in the
configuration of your browser (language
setting).

Service functions

Event logging:
If event logging is activated, internal processes are
saved in a file. Event logging is intended for serv-
icing and should only be switched on upon request
by our service department.
Log file:
Here you have the option to save the log file on
your PC.
The WAN IP address is displayed in the status
window on the network page.
Choose the preferred and alternative STUN
server. The STUN servers in the listing come from
the default and user-defined SIP providers.
Static WAN IP address on the standard gateway:
Enter the static WAN-IP address of the standard
gateway here. To find these, please consult the
documentation from your Internet provider or the
status page of your DSL router.
Settings
Configuration file:
Here you have the option to save the current con-
figuration on your PC.
All passwords are saved in the configura-
tion file in plain text. This file should be
handled accordingly with care.
Software version:
The software version of your telephone system is
displayed here.
Perform upload:
– Load new driver software: Here you have the
option to import the current software/firmware
version. To do this, select the current software
or file ending in .fls on your PC.
– Load configuration file: Here you have the op-
tion to transfer the current configuration file to
the device. To do this, choose the configuration
file that was saved previously on your PC and
ends in .cfg.
The device will be restarted automati-
cally after a software update as well as
after importing the new configuration file.
Restart
Using this function you can restart the device man-
ually.