Isdn Access; Network; Update Network Status; Network Settings - Auerswald VoIP/ISDN Installations- Und Bedienungshandbuch

Type/status:
With the S you have the choice between system
0
connection and multi-point connection.
Please note that the switch is performed with a
delay of a few seconds. Conversations that are in
progress are terminated.

Update network status

In the yellow status window you will find the IP
address currently used by the device. Here you
will also find the MAC address of the device.
You can call up the display again by pressing the
„Refresh" link.

Network settings

IP Settings:
On this page you can change the network param-
eters of the adapter.
If your network has a DHCP server for assigning
IP addresses, you can use this. Choose „Auto-
matic IP address assignment" in the IP settings.
It is, however, recommended that you use a fixed
IP address for VoIP because you must, for exam-
ple, also specify this for port forwarding in your
DSL router. An IP address that is dependent on
the network environment and therefore changes
occasionally could interfere with VoIP operations.
To choose a fixed IP address, go to IP settings,
choose „Use following IP address" and enter the
IP address, sub-network mask, and standard
gateway in the fields that appear.
The IP address is the device's desired address.
The default address is 192.168.1.111.
Enter the sub-network mask that is used. In
smaller networks this is usually 255.255.255.0.
The standard gateway is the interface to the Inter-
net. This is normally the ADSL router. Enter the IP

ISDN Access

Area code:
If for an outgoing VoIP you dial a call number with-
out an area code, the registered area code is
added automatically.
This is useful if the call numbers entered in your
phonebook do not include your area code. There
are VoIP providers that require the complete call
number consisting of area code and subscriber
call number in order to dial.

Network

address of your ADSL router in the „Standard
gateway" field.
work administrator.
Name server addresses (DNS):
In the „Preferred DNS server" field enter the IP
address of the DNS server that is used. This is
usually also the IP address of your ADSL router.
However, you can specify up to two different DNS
servers that can be reached by the device.
STUN server, WAN interface standard
gateway
These settings can be found only in Expert mode.
Setting the type of WAN interface:
Here you set whether your DSL router works with
a dynamic or static external WAN IP address. You
will find the correct setting in the settings or status
page of your DSL router.
If you do not find any clues here, perform this sim-
ple test: If the WAN IP address of your DSL router
changes each time you switch it on, the device
Configuration
An IP address must not be assigned
twice within a network. Therefore ensure
that manually assigned IP addresses are
not used. In this case consult your net-
The device is restarted automatically fol-
lowing a change. Existing voice connec-
tions are terminated.
37